Designed for strong acid, strong base, waste water and chemical process.
•The electrode adopts high-quality low-noise cable, which can make the signal output longer than 20 meters without interference.
•The electrode is made of ultra-bottom impedance-sensitive glass film, and it also has the characteristics of fast response, accurate measurement, good stability, and not easy to hydrolyze in the case of low conductivity and high purity water.
|
Model No. |
CS1733 |
|
pH zero point |
7.00±0.25pH |
|
Reference system |
SNEX Ag/AgCl/KCl |
|
Electrolyte solution |
3.3M KCl |
|
Membrane resistance |
<600MΩ |
|
Housing material |
PP |
|
Liquid junction |
SNEX |
|
Waterproof grade |
IP68 |
|
Measurement range |
0-14pH |
|
Accuracy |
±0.05pH |
|
Pressure resistance |
≤0.6Mpa |
|
Temperature compensation |
None |
|
Temperature range |
0-80℃ |
|
Calibration |
Sample calibration, standard liquid calibration |
|
Double Junction |
Yes |
|
Cable length |
Standard 10m cable, can be extended to 100m |
|
Installation thread |
NPT3/4” |
|
Application |
Strong acid, strong base,waste water and chemical process
|