The online chloride ion sensor uses a solid membrane ion selective electrode for testing chloride ions floating in water, which is fast, simple, accurate and economical.
•The patented chloride ion probe, with an internal reference fluid at a pressure of at least 100KPa (1Bar), seeps extremely slowly from the microporous salt bridge. Such a reference system is very stable and the electrode life is longer than the ordinary industrial electrode life
•Easy to install: PG13.5 pipe thread for easy submersible installation or installation in pipes and tanks.
•High-quality imported single chip, accurate zero point potential without drift
•Double salt bridge design, longer service life
|
Model No. |
CS6711 |
|
pH range |
2~12 pH |
|
Measuring material |
PVC Film |
|
Housing material |
PP |
|
Waterproof rating |
IP68 |
|
Measurement range |
1.8~35,000mg/L |
|
Accuracy |
±2.5% |
|
Pressure range |
≤0.3Mpa |
|
Temperature compensation |
NTC10K |
|
Temperature range |
0-50℃ |
|
Calibration |
Sample calibration, standard liquid calibration |
|
Connection methods |
4 core cable |
|
Cable length |
Standard 5m cable or extend to 100m |
|
Mounting thread |
NPT3/4” |
|
Application |
Industrial water, environmental protection, etc. |